Small Block Chevrolet 7/16 Stud w/Offset Intakes

Fits

1955 to 1999 262-400 SB Chevrolet
Sets 

  Part #             Ratio       Price
S1004-150 1.5:1 $378.00
S1005-150 1.6:1 $378.00
S1006-150 1.65:1 $378.00
       
Pcs.      
L1004-150-1 1.5:1 $ 27.60
L1005-150-1 1.6:1 $ 27.60
L1006-150-1 1.65:1 $ 27.60
R1004-150-1 1.5:1 $ 27.60
R1005-150-1 1.6:1 $ 27.60
R1006-150-1 1.65:1 $ 27.60
Sets 

  Part #             Ratio      Price
S1004-250 1.5:1 $378.00
S1005-250 1.6:1 $378.00
S1006-250 1.65:1 $378.00
       
Pcs.
     
L1004-250-1 1.5:1 $ 27.60
L1005-250-1 1.6:1 $ 27.60
L1006-250-1 1.65:1 $ 27.60
R1004-250-1 1.5:1 $ 27.60
R1005-250-1 1.6:1 $ 27.60
R1006-250-1 1.65:1 $ 27.60
Sets
 
  Part #             Ratio       Price
 
S1004-050 1.5:1 $378.00
S1005-050 1.6:1 $378.00
S1006-050 1.65:1 $378.00
       
Pcs.
     
L1004-050-1 1.5:1 $ 27.60
L1005-050-1 1.6:1 $ 27.60
L1006-050-1 1.65:1 $ 27.60
R1004-050-1 1.5:1 $ 27.60
R1005-050-1 1.6:1 $ 27.60
R1006-050-1 1.65:1 $ 27.60
Special Features:
* The pushrod cups have been moved
.150 to the left & right, on the intake rockers, so special guide plates will be needed. In some cases these rockers can cause damage, rather than make horsepower. It's always good to check with an engine builder before installing.

Special Features:
* The pushrod cups have been moved
.250 to the left & right, on the intake rockers, so special guide plates will be needed. In some cases these rockers can cause damage, rather than make horsepower. It's always good to check with an engine builder before installing.
Special Features:
* The pushrod cups have been moved
.050 to the left & right, on the intake rockers, so special guide plates will be needed. In some cases these rockers can cause damage, rather than make horsepower. It's always good to check with an engine builder before installing.

* Harland Sharp offset roller rocker sets for SB Chevy are designed for use with aftermarket or heavily modified stock cylinder heads.
* For extreme offset, lift, and spring pressure applications, you may want to consider a shaft rocker system, or if you have a custom 
    application and need a special offset we can do almost anything.  Please contact us for more information.

Sets Include: 4 left offset intakes, 4 right offset intakes & 8 standard exhaust.
Note: When ordering look at the rockers from the top (flat side up) with the roller towards you, the diagram shows how offsets are determined.